Spot spray
One nozzle, one weed
Per-nozzle on/off timing from each plant's position and the machine's speed.
Act · Targis
Targis turns Folira's detections into actions on a moving machine: open one nozzle for one weed, move one weeding tool, pick one ripe fruit. It only acts inside a plan an agronomist has approved.
ExampleNozzle numbers and timings are illustrative.
Capabilities
Spot spray
Per-nozzle on/off timing from each plant's position and the machine's speed.
Mechanical weeding
Steers hoes and finger weeders around crop plants (planned).
Selective picking
Arm targets for harvest robots, from ripeness detections (planned).
Plan checks
Product, rate, buffers and no-spray zones are checked before every action.
Simulation
Each implement is tested in simulation before it reaches a field.
Records
Hit or skip, timing and reason, streamed to Acreon.
Estimator
Move the sliders to see the share of ground that would be sprayed. This is a planning illustration, not a measured saving.
Share of ground sprayed
–
Ground not sprayed: –
AssumptionsOne square footprint per weed, widened by the margin; footprints do not overlap; blanket = 100 %. Real savings depend on nozzle spacing, speed and weed clumping.
How it works
1
A detection arrives from Folira with position and class.
2
The pass plan says whether this class is a target here.
3
Targis works out when the nozzle or tool reaches the plant.
4
It fires, then writes the action to the record.
Specification
| Item | Planned |
|---|---|
| Actions | Spray first; weeding and picking planned |
| Detection to command | <20 ms (target) |
| Interfaces | Nozzle controllers, ISOBUS (planned) |
| Fallbacks | Spray, skip or stop, set per field |
| Simulation | Isaac Sim per implement |
| Override | Cab switch to broadcast, logged |
Status
Nothing on this page is shipping today. Items marked planned are on the draft roadmap.
Place in the loop
Targis is the action step. It reads Folira's detections, acts inside Agrona's approved plan and writes every action to Acreon, which later records whether it worked.
Questions
An agronomist or an engineer reads every message, not a sales queue.
Sprayers with individual nozzle control are the first target. We will publish a compatibility list with design partners.
The grower and their agronomist, as today. Targis enforces the approved plan and records every decision.
Nozzle faults reported by the controller are logged, and the affected section can fall back to broadcast.
Next step
Send us one pass. We run it through Cropite and send back a per-plant report, labelled as an early example.